{"product_id":"mx-series21-3in-lcd-led-color-dicom-calib-blk-integ-front-sensor","title":"MX-SERIES21.3IN LCD LED COLOR DICOM CALIB BLK INTEG FRONT SENSOR","description":"\u003cb\u003eHybrid Display of Monochrome and Color\u003c\/b\u003e\u003cbr\u003eThe Hybrid Gamma PXL function automatically distinguishes between monochrome and color images pixel by pixel, creating a hybrid display where each pixel has optimum grayscale. As a result, monochrome images such as CT, MRI and X-ray are displayed in the ideal grayscale that corresponds to DICOM Part 14, while color images such as 3D rendering, nuclear medicine, ultrasound and endoscopy are faithfully reproduced corresponding to Gamma 2.2. This helps improve efficiency of viewing both monochrome and color images by displaying them together on the one screen.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eVisual Assessment\u003c\/b\u003e\u003cbr\u003e37 per improvement en pictThe Kumamoto Chuo Hospital, Japan, have conducted a visual assessment of the Hybrid Gamma PXL function included on the RadiForce monitor. An improvement of approximately 37% was noted when comparing the use of a color monitor with Hybrid Gamma PXL to one without it. In addition, Hybrid Gamma PXL was found to operate equally as well as monochrome monitors with GSDF when displaying monochrome images.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAchieve Clarity True to the Source Data\u003c\/b\u003e\u003cbr\u003eA medical monitor needs to be capable of high brightness in order to meet performance standards. However, in order to achieve high brightness in an LCD panel, the pixel aperture ratio has to be increased. This causes a typically unavoidable decline in sharpness. With EIZO’s unique Sharpness Recovery technology, the decrease in sharpness (MTF) is restored. This allows you to display an image safely on the monitor that is true to the original source data, even at high brightness levels.\u003cbr\u003e\u003cbr\u003eMTF measures numerically how faithfully the panel transfers detail from the original image data for viewing. When Sharpness Recovery is turned on, in the case of a 2 pixel line pair (spatial frequency of 0.926 cycles\/mm) the MTF increases by over 50%.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eMake the Precise Diagnosis\u003c\/b\u003e\u003cbr\u003eEIZO carefully measures and sets the grayscale at the factory to ensure each monitor is compliant with DICOM Part 14. Furthermore, at startup or upon wakeup, the EIZO patented drift correction function quickly stabilizes the brightness level and compensates the brightness fluctuations caused by the ambient temperature and the passage of time, allowing medical images to be faithfully reproduced with stable brightness and grayscale.\u003cbr\u003e\u003cb\u003eElegant Cabinet Design\u003c\/b\u003e\u003cbr\u003eThe monitor’s cabinet is designed with rounded corners and elegant curves on the back to present a gentle aesthetic and facilitate a comforting environment for patients and medical staff.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eImproved Workflow\u003c\/b\u003e\u003cbr\u003eEIZO’s unique Work-and-Flow technology alleviates the complexity of the imaging workflow with functions developed with the radiologist in mind. Users can take advantage of Work-and-Flow functions with the RadiForce monitor and bundled RadiCS LE software.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eRotate the Monitor According to the Image\u003c\/b\u003e\u003cbr\u003eAfter installing the included RadiCS LE quality control software, you can link the Image Rotation Plus function with the monitor’s built-in gravity sensor. This enables the screen to automatically switch to either portrait or landscape mode based on the orientation of the monitor.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eHassle-Free Multi-Monitor Configuration\u003c\/b\u003e\u003cbr\u003eUsing the DisplayPort connection, you can drive several monitors in a daisy chain sequence. This allows you to configure a multi-monitor setup without the complicated hassle of excessive cabling. A graphics board that supports daisy chain is necessary.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eManage Effortless Calibration\u003c\/b\u003e\u003cbr\u003eWith the RadiCS LE software (included) and Integrated Front Sensor (IFS) built into the front bezel, you can easily calibrate to DICOM Part 14 without having to mount, run, and remove an external sensor.","brand":"Eizo","offers":[{"title":"Default Title","offer_id":51845193826582,"sku":"JL9881","price":1519.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/3091\/4582\/files\/c2773c7507569e7714d567292faf22d38576f171.jpg?v=1788907290","url":"https:\/\/www.tekswork.com\/products\/mx-series21-3in-lcd-led-color-dicom-calib-blk-integ-front-sensor","provider":"TEKSwork","version":"1.0","type":"link"}